Return to site

Tips For Water Heater Installation And Repair

One of the most pleasant comforts brought about by the current technology to humans is the discovery of the water heater. A water heater is an important tool to a home especially in the chilly mornings when cold water is unbearable. A hot shower can get rid of oil and dirt in the skin something cold water would not do so well. Because of the advantages that people gain from the water heater, people are willing to spend their cash and purchase it and install in their homes.

This article focuses on the factors to consider when installing a new water heater in your house. Yu have to start with selecting the most suitable water heart for your home. There are two types of a water heater, those that use gas and those that use electricity. Sometimes the gas water heater is cheaper than the electric one, so you have to be vigilant when buying and check all the reviews.

It is obvious that if your house does not have gas connected to it, the other alternative is electric. Confirm the plumbing measurements of the hot and cold water pipes currently installed in the house. The reason for knowing the measurements is to make sure that the water heater fits well with the current plumbing. If the house is not new and the fixtures are a bit worn out, there is the need to buy some couplers to make sure that the pipes fit perfectly. Before commencing any installation make sure that all the utilities connected to the heater are turned off, whether it is electric or gas.

immediately you can drain the hot water tank and disconnect the hot and cold water pipes. You can get rid of the water by inserting a hose at the foot of the water tank and let it pour. Once the old unit is completely emptied disconnected, you may now remove it so that you can create space for the new one. The new unit can now be attached with the necessary fittings such as temperature and pressure valves. The next step is to fix the water lines making sure that you do not leave leakages. Make sure to call us to know more!

Next you can now connect the unit to the power source of your choice, whether gas or electric. The gas option has to be accompanied by a flue vent to get rid of the fumes. You can now put cold water in the water heater and turn it on. Make sure that you insulate your heater water tank with a water heart blanket. The insulator makes sure that the water stays hot all the time. If you do not have experience in plumbing it is advisable to use a professional port neches water heater installation plumber.

All Posts
×

Almost done…

We just sent you an email. Please click the link in the email to confirm your subscription!

OKSubscriptions powered by Strikingly